Sale!

SGSPRO 5/16″ Cut Diam, 1/4″ Shank Diam, Carbide Single Cut Cylinder Burr with End Cut End Cut End, 2-1/2″ OAL, 3/4″ LOC 10900

Value Collection #6-32 2-1/2" OAL Fully Threaded Stud Carbon Steel, Plain FinishManufacturer Part #: 407-1608S/N: 07164817UNSPSC: 31161618(Minimum Order Quantity=1, Package Quantity=1)

$6.12 $7.65

Value Collection #6-32 2-1/2″ OAL Fully Threaded Stud Carbon Steel, Plain Finish

Manufacturer Part #: 407-1608

S/N: 07164817

UNSPSC: 31161618

(Minimum Order Quantity=1, Package Quantity=1)

Reviews

There are no reviews yet.

Be the first to review “SGSPRO 5/16″ Cut Diam, 1/4″ Shank Diam, Carbide Single Cut Cylinder Burr with End Cut End Cut End, 2-1/2″ OAL, 3/4″ LOC 10900”

SGSPRO 5/16″ Cut Diam, 1/4″ Shank Diam, Carbide Single Cut Cylinder Burr with End Cut End Cut End, 2-1/2″ OAL, 3/4″ LOC 10900

Reviews

Related products

Destaco 90 Lb Clamping Force, Right Hand Swing, 31.75mm Total Stroke, Double-Acting Pneumatic Swing Clamp 1/8 NPT Port, 104.39mm Body Length x 38.1mm Body Width, 2.01 Cu In (Clamp), 2.26 Cu In (Unclamp), 130 Max psi 8315

Norton 6″ Diam x 1-1/4″ Hole x 3/4″ Thick, K Hardness, 60 Grit Surface Grinding Wheel Aluminum Oxide, Type 1, Medium Grade, 4,140 Max RPM, Vitrified Bond, No Recess 66252837421

Value Collection 1/8″ Cut Diam, 1/8″ Shank Diam, Carbide Cylinder Burr End Cut End, 1-1/2″ OAL, 9/16″ LOC 22664

Destaco 1/4-20 Carbon Steel Swivel Foot Tip Clamp Spindle Assembly 39.62mm Thread Length, 60.45mm OAL, Flat Tip Cap, 1/2″ Tip Surface Diam, Use with Toggle Clamps 207206