Mitutoyo Digital Caliper, ABSOLUTE Digimatic Caliper Series 500, Range: 0-150mm OD ID meas. w/ SPC output – 500-155-30
These Digimatic calipers have carbide-tipped jaws and allow you to take reliable measurements and offer you the following benefits:
- Thanks to the adoption of the electromagnetic induction type ABS encoder, this caliper can be used without concern for contamination on the scale face during measurement. Detection signal is not affected by dirt (water, oil, etc.) on surface of a scale.
- The slider provides smooth, stable and comfortable operation.
- Character height: 9 mm (alleviation of fatigue with the high-contrast LCD)
- The ABS (ABSOLUTE) scale requires no origin setting after power-on and also has no limit to response speed.
- Extraordinary battery life
Technical Data:
| Range |
0 – 150 mm |
| Depth bar |
flat |
| Data output |
Yes |
| Mass |
168 g |
| Digital step |
0,01 mm |
| Display |
LCD, character height 9 mm (150, 200 mm) 11 mm (300 mm) |
| Max. response speed |
Unlimited |
| Battery life |
approx. 5 years under normal use |
| Delivered |
In a case, including 1 SR-44 battery |
| ON/OFF |
Yes |
| ZERO/ABS |
Yes |
| ORIGIN (ABS-Zero) |
Yes |
| Low voltage alarm |
Yes |
| Digital/Analog |
Digital |
| Inch-Metric |
Metric |
| Accuracy |
0,02 mm |
| Thumb roller |
Yes |
| Functions |
Carbide-tipped jaws for outside/inside measurement |
| L |
233 mm |
| A |
16.5 mm |
| B |
21 mm |
| C |
14.5 mm |
| D |
40 mm |
| H |
16 mm |
Click to see all Mitutoyo Digital Calipers, ABSOLUTE Digimatic Caliper Series 500
Reviews
There are no reviews yet.