Sale!

Weiler Abrasives 6″ OD, 2″ Arbor Hole, Crimped Steel Wheel Brush 1″ Face Width, 1-1/8″ Trim Length, 0.014″ Filament Diam, 6,000 RPM 06080

Made in USA 3" Wide x 24" OAL, 120 Grit, Silicon Carbide Abrasive Belt Silicon Carbide, Fine, Coated, X/Y Weighted Cloth Backing, Wet/Dry, Series S181Manufacturer Part #: 801034-49031S/N: 63165997UNSPSC: 31191507(Minimum Order Quantity=1, Package Quantity=

$5.50 $6.88

Made in USA 3″ Wide x 24″ OAL, 120 Grit, Silicon Carbide Abrasive Belt Silicon Carbide, Fine, Coated, X/Y Weighted Cloth Backing, Wet/Dry, Series S181

Manufacturer Part #: 801034-49031

S/N: 63165997

UNSPSC: 31191507

(Minimum Order Quantity=1, Package Quantity=1)

Specifications:

Belt Width (Inch)	3
Belt Length (Inch)	24
Grit	120
Grade	Fine
Abrasive Type	Coated
Abrasive Material	Silicon Carbide
Wet/Dry Operation	Wet, Dry
Backing Material	Polyester Cloth
Coat Density	Closed
UNSPSC Code	31191507

Reviews

There are no reviews yet.

Be the first to review “Weiler Abrasives 6″ OD, 2″ Arbor Hole, Crimped Steel Wheel Brush 1″ Face Width, 1-1/8″ Trim Length, 0.014″ Filament Diam, 6,000 RPM 06080”

Weiler Abrasives 6″ OD, 2″ Arbor Hole, Crimped Steel Wheel Brush 1″ Face Width, 1-1/8″ Trim Length, 0.014″ Filament Diam, 6,000 RPM 06080

Reviews

Related products

Atrax 3/16″ Cut Diam, 1/8″ Shank Diam, Carbide Double Cut Flame Burr Radius End, 1-1/2″ OAL, 3/8″ LOC SH-53DC-ATX

Made in USA 8″ Diam x 1/2″ Hole x 3/8″ Thick, 46 Grit Surface Grinding Wheel Aluminum Oxide/Silicon Carbide Blend, Coarse Grade, 2,600 Max RPM 805-C SPI

Destaco PNP Output, Normally Open, Solid State Sensor, 0.1 Max Amps, 4.50 to 28 Volts, Power Clamp Switch 0.5 Volt Max Drop, DC Current, 0.93″ Long x 0.53″ Wide x 0.87″ High, 0.54 Ft Long Wire 810173

Keystone Threaded Products 1-1/8-5 x 3 ft. Alloy Steel General Purpose Acme Threaded Rod Left Hand Thread, Oil Finish, 2G Fit 1-1/8-5LH3