Sale!

Weiler Abrasives 4″ OD, 1/2″ Arbor Hole, Crimped Stainless Steel Wheel Brush 1/2″ Face Width, 7/8″ Trim Length, 0.0118″ Filament Diam, 12,500 RPM 00184

3M 3/4" Max Roll Diam x 1-1/2" OAL, 240 Grit Aluminum Oxide Straight Cartridge Roll 1/8" Pilot Hole Diam, Very Fine Grade, X Weighted Cloth Backing, 16,000 Max RPMS/N: 66012469UNSPSC: 31191516Manufacturer Part #: 00051119115611(Minimum Order Quantity=100,

$7.00 $15.00

3M 3/4″ Max Roll Diam x 1-1/2″ OAL, 240 Grit Aluminum Oxide Straight Cartridge Roll 1/8″ Pilot Hole Diam, Very Fine Grade, X Weighted Cloth Backing, 16,000 Max RPM

S/N: 66012469

UNSPSC: 31191516

Manufacturer Part #: 00051119115611

(Minimum Order Quantity=100, Package Quantity=1)

(Please order in multiples of 100)

Reviews

There are no reviews yet.

Be the first to review “Weiler Abrasives 4″ OD, 1/2″ Arbor Hole, Crimped Stainless Steel Wheel Brush 1/2″ Face Width, 7/8″ Trim Length, 0.0118″ Filament Diam, 12,500 RPM 00184”

Weiler Abrasives 4″ OD, 1/2″ Arbor Hole, Crimped Stainless Steel Wheel Brush 1/2″ Face Width, 7/8″ Trim Length, 0.0118″ Filament Diam, 12,500 RPM 00184

Reviews

Related products

Norton 7″ Diam x 1-1/4″ Hole x 1″ Thick, K Hardness, 46 Grit Surface Grinding Wheel Aluminum Oxide, Type 5, Coarse Grade, 3,600 Max RPM, Vitrified Bond, One-Side Recess 66252942708

Atrax 3/16″ Cut Diam, 1/8″ Shank Diam, Carbide Double Cut Flame Burr Radius End, 1-1/2″ OAL, 3/8″ LOC SH-53DC-ATX

Destaco 10-32 Carbon Steel Cap Tip Clamp Spindle Assembly 25.4mm Thread Length, 38.1mm OAL, Cone Cushion Cap, 0.44″ Tip Surface Diam, Use with Toggle Clamps 305208

Made in USA 8″ Diam x 1/2″ Hole x 3/8″ Thick, 46 Grit Surface Grinding Wheel Aluminum Oxide/Silicon Carbide Blend, Coarse Grade, 2,600 Max RPM 805-C SPI