Sale!

Tru-Maxx 4-1/2″ 60 Grit 7/8″ Center Hole Type 29 Zirconia Alumina Flap Disc Medium Grade, Coated, Arbor Attachment, 13,300 RPM 25246

Norton 3 x 1/8, 3/8" Hole 36 Grit Aluminum Oxide Cutoff Wheel Very Coarse, Reinforced, 25,465 Max RPM, Use with Die GrindersManufacturer Part #: 66243510651S/N: 75870675UNSPSC: 23131503UPC: 662435106513(Minimum Order Quantity=1, Package Quantity=1)Specific

$3.92 $4.90

Norton 3 x 1/8, 3/8″ Hole 36 Grit Aluminum Oxide Cutoff Wheel Very Coarse, Reinforced, 25,465 Max RPM, Use with Die Grinders

Manufacturer Part #: 66243510651

S/N: 75870675

UNSPSC: 23131503

UPC: 662435106513

(Minimum Order Quantity=1, Package Quantity=1)

Specifications:

Wheel Diameter (Inch)	3
Wheel Thickness (Inch)	1/8
Hole Size (Inch)	3/8
Abrasive Material	Aluminum Oxide
Reinforced	Reinforced
Bond Type	Resinoid
Wheel Type Number	Type 1 (01/41)
Maximum Rpm	25465
Wheel Color	Black
Application	Steel, Stainless Steel
Specifications	Gemini
Additional Information	Sides Reinforced
UNSPSC Code	23131503

Reviews

There are no reviews yet.

Be the first to review “Tru-Maxx 4-1/2″ 60 Grit 7/8″ Center Hole Type 29 Zirconia Alumina Flap Disc Medium Grade, Coated, Arbor Attachment, 13,300 RPM 25246”

Tru-Maxx 4-1/2″ 60 Grit 7/8″ Center Hole Type 29 Zirconia Alumina Flap Disc Medium Grade, Coated, Arbor Attachment, 13,300 RPM 25246

Reviews

Related products

Destaco 10-32 Carbon Steel Cap Tip Clamp Spindle Assembly 25.4mm Thread Length, 38.1mm OAL, Cone Cushion Cap, 0.44″ Tip Surface Diam, Use with Toggle Clamps 305208

Made in USA 8″ Diam x 1/2″ Hole x 3/8″ Thick, 46 Grit Surface Grinding Wheel Aluminum Oxide/Silicon Carbide Blend, Coarse Grade, 2,600 Max RPM 805-C SPI

Grier Abrasive 1/2″ Head Diam x 1/4″ Thickness, W183, Cylinder End, Silicon Carbide Mounted Point Green-Gray, Fine Grade, 51,750 RPM W183-S5-17572

Destaco PNP Output, Normally Open, Solid State Sensor, 0.1 Max Amps, 4.50 to 28 Volts, Power Clamp Switch 0.5 Volt Max Drop, DC Current, 0.93″ Long x 0.53″ Wide x 0.87″ High, 0.54 Ft Long Wire 810173