Sale!

Made in USA 1/4″ Cut Diam, 1/4″ Shank Diam, 14 Carbide Double Cut Cone Burr Point End, 2″ OAL, 3/4″ LOC SM-2DC-CCS2

Strauss Co. 0.591" Head Diam x 0.394" Head Thickness CBN Grinding Pin 1/4" Shank Diam x 3-1/2" Shank Length, Medium Grade, 80 GritManufacturer Part #: PT0591-05B80S/N: 50966886UNSPSC: 23131514(Minimum Order Quantity=1, Package Quantity=1)

$66.65 $133.30

Strauss Co. 0.591″ Head Diam x 0.394″ Head Thickness CBN Grinding Pin 1/4″ Shank Diam x 3-1/2″ Shank Length, Medium Grade, 80 Grit

Manufacturer Part #: PT0591-05B80

S/N: 50966886

UNSPSC: 23131514

(Minimum Order Quantity=1, Package Quantity=1)

Reviews

There are no reviews yet.

Be the first to review “Made in USA 1/4″ Cut Diam, 1/4″ Shank Diam, 14 Carbide Double Cut Cone Burr Point End, 2″ OAL, 3/4″ LOC SM-2DC-CCS2”

Made in USA 1/4″ Cut Diam, 1/4″ Shank Diam, 14 Carbide Double Cut Cone Burr Point End, 2″ OAL, 3/4″ LOC SM-2DC-CCS2

Reviews

Related products

Made in USA 8″ Diam x 1/2″ Hole x 3/8″ Thick, 46 Grit Surface Grinding Wheel Aluminum Oxide/Silicon Carbide Blend, Coarse Grade, 2,600 Max RPM 805-C SPI

Made in USA 2-1/2″ Diam x 1/4″ Hole x 3/8″ Thick, 80 Grit Surface Grinding Wheel Aluminum Oxide/Silicon Carbide Blend, Medium Grade, 8,300 Max RPM 255-M SPI

Destaco PNP Output, Normally Open, Solid State Sensor, 0.1 Max Amps, 4.50 to 28 Volts, Power Clamp Switch 0.5 Volt Max Drop, DC Current, 0.93″ Long x 0.53″ Wide x 0.87″ High, 0.54 Ft Long Wire 810173

Value Collection 5/8-11 2-5/8″ OAL Unequal Double Threaded Stud Zinc Yellow Dichromate Finish, 1-1/2″ Long Thread Length, 13/16″ Short Thread Length BD-CD560495