Clamping, Workholding & Positioning Archives - Page 26 of 38 - SpecialtyTool Shop - Tools for Unique and Specialized Projects

Norton 9″ Diam, 4-15/16″ Hole Size, 2″ Overall Thickness, 70 Grit, Type 35 Tool & Cutter Grinding Wheel Medium Grade, Aluminum Oxide, J Hardness, Vitrified Bond, 2,550 RPM 66253049112

$68.74 $137.47

Norton Grinding Segments 1-5/8″ 614636-50268 NORTON BURR REMOVER 61463650268

$29.56 $36.95

Norton K Hardness, 46 Grit Surface Grinding Wheel 2,070 Max RPM 66253246895

$6.00 $10.00

Norton Type 16, 1-3/4″ Max Diam, 3″ Head Thickness, 24 Grit Cone Aluminum Oxide, Very Coarse Grade, 5/8-11 Shank Thread 61463622195

$85.58 $171.15

OSG USA, INC. 1/4″ Cut Diam, 1/4″ Shank Diam, Carbide Ball Burr 2″ OAL, 1/4″ LOC, Bright Finish 808-2500

$3.18 $3.98

OTC 13 TON LONG 2/3 JAW PULLER Reach 15-1/4″ Spread 17″

$99.98 $199.95

OTC 53 Piece Master Torx Bit Socket Set 5900A-PLUS

$29.98 $59.95

OTC Timing Chain Retainer

$32.31 $40.39

Precise 0-4″ 4 Piece C-Type Outside Micrometer Set

$75.18 $250.59

Precise 100mmL x 33mmW x 52mmH Triple Vee V-Block Set

$7.52 $9.40

Raytech 0.1 Cu Ft, 1/15 hp, Wet/Dry Operation Vibratory Tumbler Flow Through Drain 23-009

$100.00 $811.90

Raytech Ceramic Carrier, Aluminum Oxide Abrasive, 3/8″ Long x 1/2″ High Polyhedron Shaped Polishing Tumbling Media Wet Operation, 90 Lb/Ft Density 41-331

$24.08 $30.10

Raytech Ceramic Plastic Blend Carrier, No Abrasive, 5/8″ Long x 5/8″ High Cylinder Shaped Polishing Tumbling Media V Edge, Wet Operation, 65 Lb/Ft Density 41-343

$85.64 $285.45

Raytech Plastic Carrier, Aluminum Oxide Abrasive, 1/4″ Long x 1/4″ High Pyramid Shaped Medium Cutting Tumbling Media Wet Operation, 55 Lb/Ft Density 41-145

$7.00 $10.00

Raytech Steel Carrier, Steel Abrasive, 0.3mm Diam x 5mm High Rod Shaped Polishing Tumbling Media Straight Edge, Wet Operation 41-374

$10.28 $12.85

Robinair YF1234 Oil Injector

$46.98 $93.95

S.U.R.&R. 10mm A/C Compression Union (1)

$98.00 $549.95

S.U.R.&R. 3/8″Nylon to Nylon Compression Fitting (2)

$100.00 $466.95

S.U.R.&R. Flaring Tool Kit

$69.98 $139.95

SGSPRO 1/2″ Cut Diam, 1/4″ Shank Diam, 60 Carbide Double Cut Cone Burr Point End, 2-3/16″ OAL, 7/16″ LOC 14728

$3.12 $3.90

SGSPRO 1/2″ Cut Diam, 1/4″ Shank Diam, Carbide Double Cut Oval Burr Radius End, 7/8″ LOC 13003

$98.00 $417.33

SGSPRO 1/2″ Cut Diam, 1/4″ Shank Diam, Carbide Single Cut Cylinder Burr with Radius Radius End, 2-3/4″ OAL, 1″ LOC 11875

$72.40 $241.33

SGSPRO 1/2″ Cut Diam, 1/4″ Shank Diam, Carbide Single Cut Cylinder Burr with Radius Radius End, 2-3/4″ OAL, 1″ LOC 19028

$37.38 $74.75

SGSPRO 1/2″ Cut Diam, 1/4″ Shank Diam, Carbide Single Cut Flame Burr Radius End, 1-1/4″ LOC 14425

$21.38 $26.72